|
|
TAMKOŽ ROLL VENT
Roll Vent is a self-contained ridge vent product on a roll.
 It's manufactured using a durable two-layer composite consisting of a nylon-polyester, non-woven, non-wicking fabric, heat bonded to a compression resistant, open-nylon matting of three dimensional construction. Roll Vent is capped using roofing shingles and requires no baffles, metal connectors, end caps, or special filters. Once installation is completed, Roll Vent is completely hidden by shingles and requires no maintenance.
Up to a 50-year limited warranty depending on the warranty term of the new shingle installed. By TAMKOŽ a manufacturer of quality roofing products since 1944.
Durable compression resistant nylon-polyester construction is lightweight, cannot be dented, and has no sharp edges
Flexible to conform to roof pitches between 3/12 to 12/12. For Pitches greater than 12/12, See Installation on Steep Pitch or contact TAMKO Technical Services Department
Easily installed, requires no special tools
Virtually invisible and maintenance free
Nailing line assists in proper installation using 2˝" roofing nails provided with each roll to secure both the shingles and Roll Vent
18-square inch net free area (NFA) per linear foot. Maximum ventilation
10.5" nominal width, 20- and 50- foot rolls, 0.9" minimum thickness
8.5" nominal width, 20-foot rolls, 0.9" minimum thickness
7.0" nominal width, 20-foot rolls, 0.9" minimum thickness
Miami-Dade County Approved
ICC-ES Report ESR-1059
|
|
